About the Features
The Sensor Features detect the increasing humidity released
during cooking. The oven automatically adjust the cooking
time to various types and amounts of food.
Do not use the Sensor Features twice in succession on the
same food portion - It may result in severely overcooked
or burnt food. Be sure to let the oven cool down for 5 - 10
minutes before starting the next sensor cook.
If food is undercooked after the countdown, use Cook Time
for additional cooking time
• The proper containers and covers are essential for best
sensor cooking.
• Always use microwave-safe containers and cover
them with lids or vented plastic wrap. Never use tight-
sealing plastic covers - they can prevent steam from
escaping and cause food to overcook.
• Be sure the outside of the cooking container and the
inside of the microwave oven are dry before placing
food in the oven. Beads of moisture turning into steam can
mislead the sensor.
How to Change the Automatic Settings
To reduce time by 10%:
Press 1 after the feature pad.
To add 10% to cooking time:
Press 9 after the feature pad.
Auto Cook
Allows you to microwave food choices with sensor.
1. Press AUTO COOK button.
2. Enter the food type code. See Cooking Guide for AUTO
COOK below for codes or check the display for food
types..
2. Press START.
The oven signals when steam is sensed and the time
remaining begins counting down.
Do not open the oven door until time is counting down. If
the door is opened before time is counting down 4 beeps
are emitted while the display will Scroll & Cycle "SENSOR
ERROR " until CANCEL is pressed. The sensor cook
will be cancelled as well. If the Door is opened during the
counting down, close it and press START immediately.
12
Covered
Dry off dishes so they don't
mislead the sensor.
Express Cook
1
2
6
7
Cooking Guide for Auto Cook Feature
CODE
FOOD
ENTRY
1
Chicken
2
Fish
3
Ground
Meat
4
Veggies
Vented
Auto
Cook
3
4
5
8
9
0
Start
Pause
COMMENTS
Enter veggies type
1 Fresh Veggies
2 Frozen Veggies
3 Canned Veggies
49-7000065 Rev. 0