Sauder 419517 Manual De Instrucciones página 18

Step 14
1
L
D50
å Pull the DRAWER FRONT BRACKETS (9G) apart and slide them
into the grooves in the DRAWER SIDES (D50 and D51). You may
need to gently tap them in with a hammer.
å NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å Fasten a DRAWER FRONT (L) to the DRAWER FRONT
BRACKETS (9G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
3
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M65) to the DRAWER
å
FRONT (L). Tighten one HIDDEN CAM.
Page 18
9G
D51
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
Hidden part using
recycled material.
Color may vary.
M65
L
VIEW THE T-SLOT BOX VIDEO
Push down
2
1S
Slide the DRAWER BOTTOM (D975) into the
å
grooves in the DRAWER SIDES (D50 and D51) and
DRAWER FRONT (L).
4
D50
Fasten the DRAWER BACK (D167) to the DRAWER
å
SIDES (D50 and D51) and DRAWER BRACE (M65).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
Repeat this step for the other three drawers using
å
DRAWER FRONTS (L and M).
419517
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
D975
U n fi
n i s h
e d
s u r
f a c
e
D50
L
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(20 used in this step)
D167
D51
D51
30S
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
www.sauder.com/service