Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (7F) into the large holes in the ENDS (A
and B) and UPRIGHT (C).
Repeat this step for the BOTTOM (E).
å
(10 used)
www.sauder.com/service
Do not tighten the TWIST-LOCK® FASTENERS in this step.
7F
A
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/service/tips
B
419517
C
Page 5
Publicidad
