Usb Function; Aux-In Function; Clock Setting - Trevi DS 1976 V Guia Del Usuario

Note: For the best FM reception extend the antenna. If the reception is not good try to adjust the
antenna length otherwise, however the quality of the FM reception depends on the place where
you place the unit.
The proximity of TV sets, fluorescent lamps or other appliances may cause interference in
the reception of radio programs, in this case removed the device.

USB FUNCTION

1. Insert the USB memory to the USB socket(2).
2. First press the button FUNC(37) until you see the entry USB; wait a few seconds for the player
loads all MP3 files.
3. Playback will start automatically.
4. To enter a pause, press the button(25) once.
5. To release the pause, press the button(25) a second time.
6. To switch to playback of the previous/next track press the 9(24) o :(29).
7. To fast forward in order of tens on the track number appears, press the M+/10+(5) on the
unit. Each press will increase the number of ten numbers at a time.
UNINTERRUPTED REPRODUCTION OF A SINGLE TRACK / ALL SONGS
In playback mode (USB), press more 'times MODE(34) button on the remote control to activate
in sequence:
- Listening to a single track (the display shows the word "REP 1").
- Continuous playback of all songs in memory (the display shows the word "REP ALL").
To cancel continuous playback repeatedly press the button MODE(34) until no lettering on the
display.
- Shuffle Playback (the display shows the word "RAND").
To cancel the repeatedly function press the button MODE(34) until no lettering on the display.

AUX-IN FUNCTION

1. Connect via cable (not supplied) audio output of smartphones, tablets, multimedia players
to AUX IN(1) jack of the unit.
2. Press FUNC (37) button until you see the "AU" on display.
3. Start playing the external source (see its manual).

CLOCK SETTING

To set the time, please, to follow next steps:
1. Put the unit in standby mode.
2. Press and hold for a few seconds SET/MODE(10) button on the unit, indicating the hours will
start flashing.
3. Use 9(7) o :(9) on the unit to set the time correctly.
4. Press SET/MODE(10) to confirm and go to the minute setting.
5. Use keys again 9(7) o :(9) to set the correct minutes.
6. Press the SET/MODE(10) on the unit to confirm.