Hiltron security XR100 Manual Del Usuario página 10

XR100
Case 3:
1 zone via radio and via siren on TM Series
(excluding TM600P) or PROTEC wired base
units, connection of XR20 radio control system
and a wired control system to the base unit (e.g.
SK100, PX100, KB).
PROGRAMMING
System code
!
Enter the XR100 system code as indicated in section 3. This is also used for the XR152, XR200, XR20, XR300 and
XR100 (Slave), which should interact with the base unit.
Function code
!
The function code for this installation is:
Case 4:
1 zone via radio and siren via radio to TM600P
wired base unit, connection with XR20
radio control system.
PROGRAMMING
System code
!
Enter the XR100 system code as indicated in section 3. This is also used for the XR152, XR200, XR20, XR300 and
XR100 (Slave), which should interact with the base unit.
Function code
!
The function code for this installation is:
10
0 - 0 - 0 - 0 - 0 -
0 - 0 - 0 - 0 - 0 -
SK100
zona
radio 2
0 - 0 - 0 - 0 - 0 - 0 - 0 - 0
ZonE
radio 2
1 - 1 - 0 - 0 - 0 - 0 - 0 - 0
security
Base unit
XR100
Master
Base unit
XR100
Master