Product Description; Buttons Leds; Induction Loop - Fermax VEO WIFI DDA 4,3 DUOX PLUS Manual De Instalador

PRODUCT DESCRIPTION

WIFI VEO Monitor:
BUTTONS
Button for lock release / calls to the concierge.
• When you are in communication with the Outdoor Panel (audio only or
video only or audio+video), pressing this button activates the lock release.
• With the arm hanging up (monitor idle), pressing this button makes a call
to the concierge (if there is a concierge and the monitor is in Day Mode or
Mixed Mode).
Auto-On button.
Connection via block camera or General Entrance camera (feature available
depending on the type of installation,
Auxiliary Function F1.
Auxiliary Function (negative output "-" / command transmission).
Negative transmission: Negative output is emitted by terminal F1 when the F1
button is pressed, which also sends an F1 activation command in order to
activate an auxiliary device.
Menu Button. To access:
- Programming Menu, it is accessed when the monitor is not programmed.
From this menu, you can program the monitor according to your installation
needs.
- User Menu, (once the monitor is programmed). From this menu, you can
access the user settings and customise them as you wish.
LEDS
Red LED:
Intermittent fast blinking. Monitor not programmed.
Intermittent slow blinking. Indicates that the Do Not Disturb feature is enabled.
Switched on. Monitor is idle.

Induction Loop

INDUCTION LOOP Identified with this label (depending on model). A version
of the VEO monitor with an inductive loop on the monitor receiver is available.
See 97507 Telephone Receiver Inductive Loop on www.fermax.com.
· Includes an induction loop that works with devices worn by people with
hearing disabilities.
Note: In hearing aids with manual mode selection, the Digital Mode must
be set.
Buttons
Leds
see Chapter Operation: Auto-on).
DUOX PLUS WIFI VEO MONITOR
9