Fermax VEO WIFI DDA 4,3 DUOX PLUS Manual De Instalador página 61

2. If the previous point does not occur, auto-on begins with the different panels visible
on the monitor.
Press panel 0, panel 1, general panel in sequence (depending on the availability of
panels).
Panel 0 or camera 0 of the monitor block.
1
Panel 1 or camera 1 of the monitor block.
2
Panel 0 or camera 0 of the General Entrance.
3
0
G
Once communication with a panel is established, you can change it by pressing the
button (camera).
Auto-on during incoming call:
1. If the call corresponds to a panel in the sequence described in the previous point,
the auto-on will begin for the next panel in the sequence.
2. If the call is NOT from a panel, auto-on will begin with block panel 0,
panel availability), and follow the sequence:
0
Panel 0 or camera 0 of the
1
monitor block
1
Panel identifier
1
Panel 1 or camera 1 of the
2
monitor block
(depending on
DUOX PLUS WIFI VEO MONITOR
29