Parts Description - impress IM-716W Manual Del Usuario

PARTS
DESCRIPTION
A) Plastic Grill Cover with
Screws (3)
B) Front Grill
C) Grill Clip
D) Blade Cap
E) Blade
F) Grill Lock Nut
G) Rear Grill
H) Control Panel
I) Motor Shaft
J) Oscillation Clutch Knob
ASSEMBLY
NOTE: Remove all contents from box and make sure that
all parts are present.
Step 1: Constructing the base and poles
1. Connect the cross-bar base (S) together by matching
the slots in both pieces. Secure the base of the outer
pole (Q) to the cross-bar base (S) with the 4 base
screws (T) provided. NOTE: The inner pole may be inside
the outer pole. Place finger down the hole and pull out
inner pole.
2. Remove the height adjustment knob (O) from the
(
m
outer (Q) and inner (P) poles by turning it counterclock-
wise. Feed the inner (P) and outer (Q) pole through the
base cap (R), and slide the base cap (R) to the bottom
of the outer pole (Q).
3. Feed the inner pole (P) through the height adjust-
F
ment knob (O) and extend the inner pole (P) to the
desired height. Secure the inner pole by turning the
o
height adjustment knob (O) clockwise.
A B C
K) Motor Head
L) Handle
M) Control Box
N) Lock Screw
O) Height Adjustment Knob
P) Inner Pole
Q) Outer Pole
R) Base Cap
S) Base Legs
T) Base Screws (4)
U) Safety Plug with Fuse
P
o
p
k
D E F
(Fig.1)
b
t
a
J
I
G
H
S
T
U
K
L
M
N
O
P
Q
R
Fig. 1
English - 2