Parts Description - impress IM-783 Instructivo

Model
iM-783
N
O
S
stand Fan Function asseMBlY stePs
(1) insert base shaft(K) onto base(M)
make sure it fits snuggly. (2) loosen and
remove the height adjustment nut (J), pull
out the extendable shaft(i) from the base
shaft(K), lower base cover (l) onto base
shaft and onto base, then re-fasten the
height adjustment nut. see steps 1 and 2
illustrations below.
(3) loosen screw on lower portion of fan
motor (e) and lower on the extendable
shaft(i) as shown in step 2 below. then
tighten screw to fasten the motor.
rated voltage
120v
P
Q
R
T
U
rated Frequency
60hz
Parts
descriPtion
a. Front Grill
B. Blade
c. screWs
d. rear Grill
e. Motor
F. oscillation KnoB
G. on/oFF/sPeed sWitch
h. PoWer cord
i. eXtendaBle shaFt
J. heiGht aJustMent nut
K. Base shaFt
l. Base cover
M. round Base
n. Grill screW and nut
o. Wall Mount screWs (6)
P. Plastic anchor
Q. Wall hooK
r. suPPort arM
s. tuBes
t. tuBe screWs
u. ruBBer Feet
(4) attach the rear grill (d) onto the motor
with 4 screws (c). Please see step 3 illus-
tration below.
(5) Fasten fan blade (B) on the motor shaft
with the screw to fasten it. Please see step
4 illustration below.
(6) attach front gill(a) onto the rear
grill(d)and secure in place by folding the
grill retaining clips as shown in inset of
step 5 illustration. screw on the nut to
secure the grills together.
rated Power
55W
English - 2