Makita HM1512 Manual De Instrucciones página 5

Ocultar thumbs Ver también para HM1512:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

► 1 . Power-ON indicator lamp (green) 2. Service
indicator lamp (red)
Electronic function
The tool is equipped with the electronic functions for
easy operation.
Soft no-load rotation function
(For Model HM1512 only)
Blows at no load per minute becomes smaller than
those on load in order to reduce vibration under no
load, but this does not show trouble.
Once operation starts with a bit against concrete,
blows per minute increase.
When temperature is low, the tool may not have
this function even with the motor rotating.
Soft start
The soft-start function minimizes start-up shock,
and makes the machine start smoothly.
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and unplugged before carrying out
any work on the tool.
Side handle (auxiliary handle)
CAUTION:
Always use the side handle to
ensure safe operation.
CAUTION:
After installing or adjusting the
side handle, make sure that the side handle is
firmly secured.
The side handle can be swung 360° on the vertical and
secured at any desired position.
Loosen the clamp nut to swing the side handle to
a desired position, and then tighten the clamp nut
securely.
2
1
► 1 . Side handle 2. Clamp nut
Installing or removing the bit
Grease
Clean the shank end of the bit and apply grease before
installing the bit.
Coat the shank end of the bit beforehand with a small
amount of grease (about 0.5 - 1 g). This chuck lubrica-
tion assures smooth action and longer service life.
► 1 . Shank end 2. Grease
5 ENGLISH
2
1
1
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hm1502

Tabla de contenido