Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
12
12B
12A
12B
12B
12A
12 HOSE CONNECTION TO SPOUT BODY
From underneath sink, push the Center Connector (12A) onto Receiving Tube (12B),
until unable to push any further. Pull down on the quick connect housing (12A). If the
housing and the Inner Collet (12C) separate slightly but do not pull off the Receiving
Tube (12B), the connection is secure.
13
13C
13B
13A
13E
13E
13A
13D
13B
13E
13 HOSE CONNECTION TO VALVE BODY
Slide the End Connectors (13A) with arrow (13D) pointing up onto the Valve Bodies
(13B). Push the End Connectors (13A) all the way up until completely seated. Be
careful not to damage O-Rings (13C). Place Clips (13E) onto End Bodies (13C) to
secure End Connectors (13A).
ENGLISH
12C
12A
12A
13C
13B
13D
13A
14
14B
14A
14 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (14A) to Faucet Inlets (14B). Hot water supply lines go into
left inlet. Cold water supply lines go into right inlet. (Supply lines not included). Please
follow manufacturer's instructions when installing supply lines.
DRAIN BODY INSTALLATION
15
15 POP-UP INSTALLATION
Install and adjust Pop-Up (15A) using separate instructions supplied with the Pop-Up
assembly.
4
14B
HOT
14A
COLD
15G
15A
15B
15C
15F
15D
15E
Publicidad
Tabla de contenido
