Connecting Headphones; Using Your Tv; Turning Your Tv On And Off; Selecting The Tv Signal Source - Dynex DX-LCD19 Guia Del Usuario

Using your TV

Connecting headphones

Note: Headphones are not included.
To connect headphones:
• Plug the headphones into the headphone jack on the left side of your TV. When
headphones are plugged in, no sound comes from the speakers.
Using your TV

Turning your TV on and off

To turn your TV on and off:
1 Plug the power cord into a power outlet. The power indicator on the front of your TV
lights red.
2 Press
video image appears on your TV' s screen.
3 Press
Warning: When you turn off your TV, electrical power is still connected to it until the power
cord is unplugged.

Selecting the TV signal source

To select the TV signal source:
1 Press MENU. The OSD opens.
2 Press
3 Press
Cable.

Selecting the video source

Depending on the video device you have connected to your TV, you can select TV, A/V,
S-Video, Component, VGA, or HDMI as the video source.
To select the video source:
• Press and hold INPUT until the source you want appears.
• Or, press INPUT. When the list of video sources appears, press an arrow button to
select the source, then press ENTER.
to turn on your TV. The power indicator turns blue. Several seconds later, the
again to turn off (put in standby mode) your TV.
or to highlight TV, then press
or to highlight Tuner Mode, then press
to enter the TV menu.
or to select Antenna or
21