Publicidad
Idiomas disponibles
Idiomas disponibles
Gewiss
Access and loading data
6. Access and loading data
The process to follow to access the USB connector available in charging stations is outlined below.
Remove the four bolts shown in the following figure, before removing the bottom cover and inserting the USB
memory in its connector.
In order to load the data the station must be powered.
The station flashes white for several seconds if the parameters have been loaded incorrectly.
After loading the data, remove the USB memory and mount the cover.
16
ABA2023IQM05_ - 7.55.4.186.2 - Configuration
Publicidad
Capítulos
