Naxa NPD-1004 Manual De Operación página 14

HEADPHONE OPERATION
Headphone Overview
1. USB charging Port
2. Volume Down/Previous Button
3. Bluetooth /Battery Indicator
4. Play/Pause,Power On/Off Button
5. Volume Up/Next Button
6. Microphone
7. AUX IN Jack
Bluetooth Operation
Press and hold the
Bluetooth indicator will
Activate the Bluetooth on your Bluetooth
the pairing name "NPD-1004" will appear on pairing list, select it and try pairing.
The Bluetooth indicator will
During play , press the
Press the or button on headphone to adjust the headphone's volume level.
V V V V
Press and hold the or
Phone call operation
During a incoming call, press the
talk. After call, press the
Press the twice to dial the number last
NOTE:
When connecting with headphone
DVD player before connection, it may take about 30 seconds to 2 mimutes to connect successfully.
If connection between headphone and DVD player fails, please
Connect with DVD player by AUX IN Jack
(Aux in) jack
on headphone
NOTE:
It is not necessary to power on the headphones when connected via the AUX cable.
The V+ and V- buttons
button to power on the headphone, the unit will say "power
blue and red alternatively.
device (such as smart
blue slowly and a beep tone will be heard after connection
button to pause, press it again to play again.
button to skip to previous or next track.
button to accept the call. Using the microphone on headphone to
button to end the call.
from
will not function when connected via the AUX cable.
14
1
V V
2
3
4
5
6
7
), after a while,
.
, you press the BT PAIR button on
the headphone.
Headphone Jack
on DVD Player
V V
on" and the
.