System Setup - Naxa NPD-1004 Manual De Operación

SYSTEM SETUP

In Video Setup Page:
1.When PDVD Picture is selected, use the Directional and OK buttons to set the panel quality for Sharpness,
Brightness, Contrast, Hue, or Saturation as preferred.
2.When Output Video is selected, use the Directional and OK buttons to set the Sharpness, Brightness,
Contrast, Gamma, Hue, or Saturation of the Video output signal as preferred.
In Preference Setup Page:
1.When TV Type is selected, use the Directional and OK buttons to set to PAL, AUTO, or NTSC.
(NOTE: The TV system for USA, Canada, and Mexico is NTSC.)
2.When Audio, Subtitle, or Disc Menu is selected, use the Directional and OK buttons for the priority of the
available language. (Function depends on the recording of the DVD.)
3.When Default is selected, use the Directional and OK buttons to reset all the settings back to default setting
or press the SETUP button to exit without changes.
20