Dash Disassembly; Mercedes Glk 2010-Up - Metra 99-8716B Instrucciones De Instalación

Mercedes GLK 2010-up

1. Unclip and remove center A/C vent.
(Figure A)
2. Unclip and remove the small trim
between the A/C vent and the top of
the factory radio.
3. Remove the (2) exposed Torx screws
from the factory radio. (Figure B)
4. Slide the clips on the left and right top
sides of the radio up to release the
radio from the sub dash. Disconnect
harnesses and antennas. (Figure C)
5. Remove (4) Torx screws securing the
trim covering from the bottom of the
factory radio for use in Kit Assembly.
(Figure D)
Continue to kit assembly
(Figure A)
Dash Disassembly 99-8716B
(Figure B)
(Figure C)
(Figure D)
3