Kit Assembly; Din Head Unit Provision - Metra 99-8716B Instrucciones De Instalación

DIN head unit provision

1. Attach the trim covering to the bottom
of the 99-8716 radio housing using the
factory hardware. (Figure A)
2. Slide the DIN cage into the Radio
housing and secure by bending the
metal locking tabs down. (Figure B)
3. Slide the aftermarket head unit into the
cage and secure. (Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-8716B
4
(Figure A)
(Figure B)
(Figure C)