Connecting The Power Cable(S) - Dell XC6320 Introducción Al Sistema

Connecting the Power Cable(s)

Figure 5. Connecting the Power cable
Figure 6. Routing the cables
Connect the system's power cable(s) to the system and, if a monitor is used, connect the
monitor's power cable to the monitor. Plug the other end of the power cable(s) into a
grounded electrical outlet or a separate power source such as an uninterrupted power
supply (UPS) or a power distribution unit.
NOTE: The system supports both AC and HVDC power inputs. Your
system can support up to two 1600 W power supply units (PSUs)
(200−240 VAC nominal input voltage).
Getting Started With Your System | 7