List Of Parameters - AERMEC NSB Serie Manual De Uso

red and switches off the alarm buz-
zer. When in display of the alarms,
pressing the button a second time
results in a reset of the alarm(s). If
there are no alarms, the NO ACTIVE
ALARM screen is displayed. The
alarm sequence is given by pressing
the UP / DOWN arrows.
Tasto : When the cursor is positio-
ned on HOME (cursor in display
position 0,0) these buttons have the
function of scrolling the screens
the values shown in the windows are the default values
Main menu
menu
(1) Time
(2) Day
(3) Date
(4) Evaporator water inlet temperatur
(5) Evaporator water outlet temperature
(6) pCO2 board the parameters ondi-
splay refer to
(7)Machine operating status:
of a group. From the last one, the
display returns to the first one and
vice versa. If the cursor is in a
numerical field, the buttons incre-
ment or decrement the value that
the cursor is positioned on. If it is
a selection field, pressing the UP /
DOWN buttons display the options
available (for example, Yes / No).
Enter Alarm: In the value setting
enter
screens, the first time this button is
pressed, the cursor moves on to the

List of parameters

(1)
1 0 : 2 3
I N G R . A C Q U A
U S C I T A
U : 0 1
(6)
Legenda
ON machine on
PUMPDOWN pumpdown cycle in progress
DEFROST defrost cycle in progress
OFF BY KEYB machine switched off by keyboard command
OFF BY DIG IN machine switched off by remote contact
OFF BY SUPERV machine switched off by supervisor
OFF BY TIME Z machine switched off by timer
OFF BY ALARM machine switched off by an alarm
OFF BY SER. OFF machine switched off by lack of regulation probe by super-
visor
first entry field. The next times, the
value entered is confirmed and the
cursor moves on to the next field.
After the last field, it returns to the
HOME position.
(2)
L U N 1 5 / 0 7 / 0 5
1 3 . 5 ° C
A C Q U A 1 0 . 5 ° C
O N
(7)
(3)
(4)
(5)
9