American Standard DXV Landfair D35107.640 Instrucciones De Instalación página 2

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1
INSTALL DIVERTER
screws that secure the DIVERTER LID (2) and remove Lid. Inspect the
inside surface of diverter port. Diverter port must be free of any dirt.
Clean if necessary.
• Remove DIVERTER KNOB (5) from DIVERTER (3).
• Install DIVERTER (3) with SCREWS (4) removed from DIVERTER LID (2).
• Operate DIVERTER (3). DIVERTER (3) should slide in and out smoothly.
2
INSTALL VALVE COVER
• Push CAP (1) over VALVE
CARTRIDGE (2) until
seated against stop.
3
INSTALL TRIM
• Figure 1. Push ESCUTCHEON HOLDER (1) onto CAP (2).
Make sure O-rings (3 & 4) are in place.
• Figure 2. Install ESCUTCHEON (5) onto CAP (2)
• Align mounting holes in ESCUTCHEON (5) with
with threaded mounting holes in valve body.
• Secure ESCUTCHEON (5) with SCREWS (6).
• Push DIAL PLATE (7) onto CAP (2).
• Figure 3. Thread DIVERTER KNOB (8) onto diverter stem.
• Install CROSS HANDLE (9) into VALVE STEM (10) and secure
with SCREW (11).
• Push INDEX BUTTON (12, 12a) into HANDLE (9).
CAUTION
Turn off water at main supply.
2
THREADED
MOUNTING
HOLES
(1). Remove two
1
THREADED
MOUNTING
HOLES
Figure 1.
2
Figure 2.
Figure 3.
- 2 -
DIVERTER
PORT
2
3
4
5
1
2
5
6
"OFF" AT BOTTOM
8
10
11
9
3 & 4
1
7
12
12a
M 965541 Re v. 1.2

Publicidad

Tabla de contenido
loading

Tabla de contenido