Connecting Cable - AKG C 444 Modo De Empleo

2 Interfacing
2.5 Connecting
Cable
12
To connect to a balanced (XLR) input, use a standard XLR
cable.
Fig. 1: Connecting cable for unbalanced microphone inputs.
To connect to an unbalanced input (mono jack), use a cable
with a female XLR connector and TS jack plug (see fig. 1
above):
1. On the XLR connector, use a wire bridge to connect pin 1
to pin 3 and the cable shield.
2. Connect the inside wire of the cable to pin 2 on the XLR
connector and the tip contact of the jack plug.