Weight Limits; Adjustable Shelf - Sauder 419188 Instrucciones De Instalación

Step 14
Position your unit in its fi nal location against a wall.
å
Use a 1/4" drill bit to make a hole in your wall for the WALL ANCHOR.
å
Fasten the SAFETY STRAP (6) to the wall using a 1" PAN HEAD
å
SCREW (12) and SAFETY DRYWALL ANCHOR (5).
NOTE: Do not turn the SAFETY DRYWALL ANCHOR (5) into a wall
å
stud. If you prefer to fasten the SAFETY STRAP (6) to a wall stud, go
to your local hardware store for proper hardware.
Peel twenty-six APPLIQUES (7) from the applique card and stick
å
them over the heads of the SCREWS in the ENDS (A and B).
NOTE: Please read the back pages of the instruction booklet for
å
important safety information.
This completes assembly. Clean with your favorite
å
furniture polish or a damp cloth. Wipe dry.
1" PAN HEAD SCREW
(1 used in this step)

Weight Limits:

Top Shelf - 50 lbs.
Adjustable Shelf - 25 lbs. each
Bottom - 50 lbs. total
Peel the APPLIQUES
from the applique card.
(26 used)
Page 18
14
www.sauder.com
5
No load
B
6
14
A
419188