System Requirements; Windows Setup - Targus DOCK171 Guia Del Usuario

Targus Universal USB 3.0 DVHD-SV2K Docking Station with Power

System Requirements

Hardware
• USB Port (USB 3.0 recommended)
Operating System (any of the following)
• Microsoft Windows ® 7, Windows ® 8, Windows
(32/64-bit)
• Mac OS ® X v10.8 or later
• Android 5.0 or later (*with Host Mode enabled, with support limitations
applies, refer to www.displaylink.com for details)
• Chromebooks (*selected device only, refer to www.displaylink.com for device
compatibility)
• Ubuntu 14.04.x LTS and 16.04 LTS on x86 platform (*refer to
www.displaylink.com for compatibility and limitations)

Windows Setup

To ensure the best Windows performance, please be sure to update your host
PC Display Adaptor and USB 3.0 Drivers. These updates are often available
from your IT department or from the PC manufacturer if you have Administrator
rights to download and install drivers for your PC.
Welcome to your Targus Universal Docking Station DisplayLink Manager. The
DisplayLink Manager software, if not already installed, can be downloaded
from a Windows Update server or from www.targus.com. It is represented
by the icon in the Windows Task Tray and allows you to easily connect
additional monitors to your laptop or desktop via the Targus Docking Station.
Using the Windows Control Panel Display Screen Resolution window, the
connected monitors can be configured to either mirror your main screen, or
extend the Windows desktop allowing visibility of more applications at the same
time. The DisplayLink USB Graphics devices can also be configured to be the
main display.
5
® 8.1, or Windows ® 10
Targus Universal USB 3.0 DVHD-SV2K Docking Station with Power
The DisplayLink Manager allows full configuration of all additional USB displays,
including:
• Support for addition USB Displays in Windows 7, 8, 8.1, 10 and later
• Resolution up to 2560 X 1440 for HDMI and 2048 x 1152 for DVI-I
• Display orientation and location modification
• Layout of displays
DisplayLink software also provides drivers for Sound and Ethernet built-in.
These can also be selected in the Windows Control Panel.
OS-X Setup
Upon installation of the DisplayLink software for OS-X available at www.targus.
com, Macbook users can use the System Preferences for Displays to adjust
the external monitors. OS-X allows configuration of all additional USB displays,
including:
• Support for additional USB Displays in OS-X 10.9 or later
• Resolution up to 2560 X 1440 for HDMI and 2048 x 1152 for DVI-I
• Display orientation and location modification
• Layout of displays
DisplayLink software also provides drivers for Sound and Ethernet built-in.
Android Setup
Install the DisplayLink Desktop application for Android 5.0 and later from the
Google Play Store. Enable USB Debugging/Host mode on your Android device.
6