Brizo SENSORI VETTIS Serie Manual Del Usuario página 5

1 Cartridge Installation
A.
3
2
B.
3
3
Note: The Sensori
rough (R66000-WS) must be installed before
installing the trim.
A. Turn off water supplies from main or
inlet stops (1). Remove plasterguard (2),
bonnet nut (3) and test cap (4) from the
body.
B.
Locate flats (1) on cartridge (2) and inside
of sleeve (3). Align flats and insert cartridge
into sleeve being careful not to push on
copper element at end of cartridge.
4
R66000-WS
1
1
Thermostatic Valve
®
C.
1
5
D.
2
1
C. Locate "V" (1) on cartridge sleeve and "V"
notch (2) on valve body (3). Align the "Vs"
and press sleeve and cartridge assembly
(4) into valve body (3) and note the "UP"
position (5).
D.
Slide extended bonnet nut (1) over the
cartridge and thread onto the body.
Hand tighten securely.
Do not use original bonnet nut provided
with rough.
3
1
1
4
2
3
91844 Rev. B