Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4
Trim Installation
A.
Optional Extension
Kit Available -
RP91023▲
C.
4
6
Slide O-ring (1) over bonnet nut (2) and
A.
position it in groove on bonnet nut (2).
The O-ring, acts as a spacer to steady
the trim sleeve.
Note: Depending on location of valve
within the wall and wall thickness, an
optional extension kit may be needed.
RP91023▲ will provide up to 1-3/4" of
extension.
Slide trim sleeve (3), over the bonnet
B.
nut (2) and O-ring (1). Ensure sleeve is
securely positioned over cartridge.
C.
Place the escutcheon (4) on wall and
secure to the mounting bracket (5) using
the 2 short screws (6) provided. Do not
overtighten.
2
1
5
B.
3
D.
4
7
D.
Slide screw cover (7) over trim sleeve (3)
and press firmly until the cover is flush with
escutcheon (4). O-ring will hold screw cover
in place.
Before installing handle, ensure valve
is in the full cold position (clockwise).
Orient handle (8) so the lever is pointing
downward and press handle onto splined
stem of cartridge. Secure handle with set
screw provided (9) and press button (10)
into hole.
6
1
2
3
8
9
10
91844
Rev. B
Publicidad
Tabla de contenido
