Publicidad
Idiomas disponibles
Idiomas disponibles
How to Assemble
*Before assembling, please make sure which side of the Left/Right Side Leg is the outer side. There are only 8 holes
on the outer side of the Left/Right Side Leg.
*There are 3 holes for the Bolts and 2 holes for the Dowels, which should face the outer side of the Left/Right Bottom Leg.
1.
Insert Dowels into the dowel holes of the Left/Right Bottom
Legs. Then attach the Left and Right Side Legs using bolts
as shown below (only one side of the Side Leg needs to be
attached).
Side Leg
Bolt
Spring Washer
Flat Washer
Dowel
3.
Repeat Steps 1 and 2 to attach the other Bottom Leg/Side Leg.
How to Clean
lUse a mild detergent and water and clean with a soft cloth/sponge. Cleaning with a scrub brush and/or using a
polishing powder may cause scratches, rust and/or discolor this product.
lWhen using creosol or other disinfectants, make sure to dilute them, otherwise damage to the wood finish or
discoloration may occur.
lDo not use harsh chemicals such as thinner, benzene or alcohol as these may cause damage/discoloration to
the wood finish.
lAfter cleaning, wipe dry with soft cloth or place in a shaded area to air dry; do not place product in direct sunlight.
Specifications
3-Step Pet Stool V1
Product Name
Product Size
15"W x 26"D x 18.5"H
Product Weight
8.1lbs
Step: Acacia(Lacquer finish)
Material
Back side of Anti-Slip Carpet: Acrylic resin
lPlease note that product specifications and design may change without prior notice for the purpose of the quality improvement.
660092
Use a Phillips-head screwdriver for assembly
Outer Side of
Bottom Leg
Hole for
the Bolt
Hole for the Dowel
Bottom Leg
.
2.
Insert the Dowels on the Cross Bar into the dowel
holes on the Bottom Leg, followed by attaching the
Top Step/Steps to the Side Leg using Bolts. Then
attach the Step Bars to the bottom Steps using
Screws as shown below.
Step
*One side needs to be on the bottom when
assembled by one person.
*Please make sure there are no loose Bolts.
Flat Washer
Spring Washer
Bolt
Rubber skid: Elastomer
If you find something wrong with this product, please let us know. Thank you!
Replacement parts may be purchased by contacting Richell USA directly at the number
listed below or at www.richellusa.com.
Designed by:
Richell Corporation, Japan
Top Step
Hole for
the Dowel
Bottom Leg
Anti-Slip Carpet: Polyester
Distributed by:
Richell USA Inc.
Grand Prairie, Texas 75050
Phone (972) 641-9795
Fax (972) 641-8495
www.richellusa.com
Visit us at
Made in Viet Nam
Step Bar
Step
Screw
Side Leg
Cross Bar
1305
Publicidad
