Diagnostics And Troubleshooting - Lutron PHPM-WBX-DV-WH Instrucciones De Instalación

Diagnostics and Troubleshooting

Phase-Adaptive Power Module (PHPM-WBX)
Module Status
Model Number LED Color LED Action
PHPM-WBX-DV-WH
PHPM-WBX-120-WH Green
PHPM-WBX-277/DV Orange
Output Status
Red LED Action
Normal Operation
OFF
Continuously ON
1 blink/second (slow)
Protection Mode
1 blink, pause, repeat
2 blinks, pause, repeat
3 blinks, pause, repeat
4 blinks, pause, repeat
Description
OFF Module not powered.
WARNING: Shock Hazard.
May result in serious injury
or death. Control input may
still be powered. Turn OFF all
breakers before removing unit.
1 blink/second (slow) Module powered; normal operation
10 blinks/second Protection Mode. See Output Status
(fast) LED codes below.
OFF Module not powered.
WARNING: Shock Hazard.
May result in serious injury
or death. Control input may
still be powered. Turn OFF all
breakers before removing unit.
1 blink/second (slow) Module powered; normal operation
10 blinks/second Protection Mode. See Output Status
(fast) LED codes below.
Control Input Load
Status Status
Input signal OFF or
OFF
disconnected
ON ON
ON ON
ON OFF
ON OFF
ON ON full
ON OFF
Description/Problem Solution
Load OFF
Incandescent/electronic
dimming
Magnetic dimming
Remove power; repair fault;
Load short-circuit
re-apply power
Over-voltage error Verify proper load on output
Internal device is damaged;
Shorted component
replace power module
Remove power; reduce load;
Load Overload
re-apply power
Phase-Adaptive Power Module with 3-Wire Fluorescent Input
Module Status Output Status
LED (Green or LED (Red)
Orange)
—
—
—
7