3. The cutter stapler shall be sealed with aseptic packaging, and once the aseptic
packaging is opened, the product shall not be re-used even though after
re-sterilization.
4. If case of any missing or unpinning of cutter stapler and its components in the
transportation and installation, please recheck the components of stapler cartridge
before use.
5. After finishing the anastomosis, it is necessary to check the cutting-off stump or
residual tissues; if the incision is complete, it means that the effect of anastomosis is
satisfying; if there is any defect or missing, more staplers shall be made on the
corresponding incision to ensure the quality of anastomosis.
6. The ex-factory stapler shall be sealed with aseptic packaging, and the residual
amount of ethylene oxide after the sterilization shall lower than 10ug/g.
7. This manual is NOT a reference to surgical operation, but a general introduction to
the use of this stapler, and the operator shall refer to another related medical
literature for surgery.
SCHEMATIC VIEW