General Power Tool Safety Warnings - Parkside PFBS 12 B4 Traducción Del Manual De Instrucciones Original

Charger PFBS 12 B4-1
Primary (input)
Rated voltage
Rated current
Secondary (output)
Rated voltage
Rated current
SMPS – switched-
mode power supply
Charging time
Safety transformer
Protection class
Polarity
Protection type
Fuse (internal)
Noise emission value
Noise measurement value determined in accord-
ance with EN 60745 . The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty K
Wear hearing protection!
Total vibration value
Uncertainty
PFBS 12 B4
100–240 V ∼,
50/60 Hz
(AC)
0 .8 A
12 V (DC)
1 .5 A
approx . 1 hour
short-circuit-proof
II / (double insulation)
IP20 Protection against
solid objects with a
diameter of more than
12 .5 mm
2 A
T2A
L = 61 .8 dB (A)
pA
K = 3 dB
pA
L = 72 .8 dB (A)
WA
K = 3 dB
WA
a = 1,216 m/s
2
h, SG
K = 1 .5 m/s
2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool .
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate .
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool .
► Try to keep the load as low as possible .
Measures to reduce the vibration load are,
e .g . wearing gloves and limiting the working
time . Wherein all states of operation must be
included (e .g . times when the power tool is
switched off and times where the power tool
is switched on but running without load) .
General power tool
safety warnings
WARNING!
► Read all safety warnings and all
instructions . Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool .
GB │ MT │ 51 ■