Use And Handling Of The Cordless Electrical Power Tool; Service; Safety Instructions For All Applications - Parkside PFBS 12 B4 Traducción Del Manual De Instrucciones Original

c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally .
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users .
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools .
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control .
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation .
5 . Use and handling of the cordless
electrical power tool
a) Charge a rechargeable battery unit using
only the charger recommended by the manu­
facturer. Chargers are often designed for a
particular type of rechargeable battery unit .
There is the danger of fire if other types of
rechargeable battery units are used .
b) Only the rechargeable battery units supplied
are to be used with an electrical power tool.
The use of other rechargeable battery units may
lead to the danger of injury or fire .
c) When they are not being used, store
rechargeable battery units away from paper­
clips, coins, keys, nails, screws or other small
metal objects that could cause the contacts to
be bridged. Short-circuiting the contacts of a
rechargeable battery unit may result in heat
damage or fire .
PFBS 12 B4
d) Fluids may leak out of rechargeable battery
units if they are misused. If this happens,
avoid contact with the fluid. If contact occurs,
flush the affected area with water. Seek addi­
tional medical help if any of the fluid gets into
your eyes. Escaping battery fluid may cause
skin irritation or burns .
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
able battery from heat; for example, from
continuous exposure to sunlight, fire, water
and moisture. There is a risk of explosion .

6 . Service

a) Have your power tool serviced by a qualified
repair person using only identical replace­
ment parts. This will ensure that the safety of
the power tool is maintained .
Safety instructions for all
applications
General safety instructions for grinding,
sand paper sanding, working with wire
brushes, polishing, milling and abrasive
cutting
a) This power tool is intended for use as a grinder,
sandpaper sander, wire brush, polisher, milling
machine and abrasive cutting machine.
Please follow all safety instructions, instruc­
tions, diagrams and data that you receive
with the appliance. If you do not observe the
following instructions, this can lead to electrical
shock, fire and/or serious injuries .
b) Do not use any accessories that have not
been provided or recommended by the manu­
facturer for this power tool. Just because you
can attach the accessories to your power tool,
does not ensure they are safe to use .
c) The permissible speed of the accessory tool
used must be at least as high as the maximum
speed specified for the power tool. Accessories
that rotate faster than the permissible rate can
break and throw pieces into the air .
Protect the recharge-
GB │ MT │ 53 ■