Tips And Tricks; Maintenance And Cleaning - Parkside PFBS 12 B4 Traducción Del Manual De Instrucciones Original

■ The maximum diameter of the assembled
grinding bodies, grinding cones, pencil grinders
with a thread insert may not exceed 55 mm .
The maximum diameter of sandpaper grinding
accessories may not exceed 80 mm .
NOTE
► The max . permissible length of a mandrel is
33 mm .
■ Store the accessories in the original box or store
the accessory components somewhere else to
protect them from damage .
■ Store the accessories somewhere dry and not in
the vicinity of aggressive media .

Tips and tricks

■ If you exert too much pressure, the fitted tool
can break and/or the workpiece could be
damaged . You will achieve optimum working
results by moving the tool over the workpiece at
a steady speed and while exerting light pressure .
■ When carrying out cutting work, hold the
appliance firmly with both hands .
■ Observe the data and the information in the
table to prevent the end of the spindle from
touching the perforated base of the grinding
tool .
PFBS 12 B4

Maintenance and cleaning

The appliance is maintenance-free .
■ Remove all dirt from the appliance . Use a dry
cloth to do this .
■ At the beginning and end of an extended
period of non-use, charge the battery fully .
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level is
between 50% and 80% . The optimum storage
environment is cool and dry .
WARNING!
■ Have the power tool repaired by the
service centre or a qualified electrician and
only using genuine replacement parts. This
will ensure that the safety of the appliance is
maintained .
■ Always ensure that the power plug or the
mains cable is replaced only by the manu­
facturer of the appliance or by an approved
customer service provider. This will ensure
that the safety of the appliance is maintained .
NOTE
► Replacement parts not listed (such as the
charger) can be ordered via our service
hotline .
GB │ MT │ 59 ■