Tools
Connecting an Audio Device
<Connecting a Headset>
1. Select Menu > 10. Tools > 3. Connectivity >
1. Bluetooth > 3. Settings and check that [Audio
Device Select] is set to [Headset]. (If Bluetooth is
disabled, enable Bluetooth.)
2. Connect the headset according to the procedures
described in the Pairing Devices section.
3. To use the headset, select the headset from the
registered devices, press the Option key and then
select 2. Connect.
4. To check that the selected headset has been
connected successfully, press the Option key. If it
is properly connected, 2. Disconnect will appear.
If it is not connected, 2. Connect will appear.
<Connecting a Handsfree Kit>
1. Select Menu > 10. Tools > 3. Connectivity >
1. Bluetooth > 3. Settings and check that [Audio
Device Select] is set to [Handsfree]. (If Bluetooth is
disabled, enable Bluetooth.)
2. Connect the handsfree kit according to the
procedures described in the Pairing Devices
section.
82
3. To use the handsfree kit, select the handsfree kit
from the registered devices, press the Option key
and then select 2. Connect.
4. To check that the selected handsfree kit has been
connected successfully, press the Option key. If it
is properly connected, 2. Disconnect will appear. If
it is not connected, 2. Connect will appear.
10.3.2 Dialup network
The Dialup network function synchronizes the data in a
phone and the data on a server such as contact
address information and schedule items via a wireless
network.
10.4 Calculator
You have a calculator function that provides 4
calculations of addition, subtraction, multiplication and
division.
You can input numbers using the number keys, and
operators using the up, down, left, and right direction
key. You can input a decimal point by pressing the left
soft key. Whenever you press the Clear key,
characters are sequentially deleted in reverse
direction.