Handset Lock; Change Codes - LG U8210 Manual De Usuario

activated"/"Already cancelled" message will be
displayed.
2. 3 incorrect PIN code entries in the PIN code input
window would invalidate the PIN code. In this case,
you have to input the PUK (PIN Unblock Key) code to
configure the PIN code again.
3. The maximum allowed numeric of attempts of PUK
input is 10 times. 10 occasions of incorrect PUK
entries would limit the mobile phone use.
Press the Back key in the PIN code input window to
return to the previous step.

12.4.2 Handset lock

You can lock your mobile phone to prevent it being
used by other people. The following 4 lock functions
are provided.
- When switching on: Whenever the mobile phone is
turned on.
- If SIM Changed: When the mobile phone's SIM card
has been changed.
- Immediate: Locks the phone immediately.
- None: Cancels lock function.

12.4.3 Change codes

You can change PIN, PIN2, the mobile phone
password and the call barring password.
12.4.3.1 PIN code
PIN is the abbreviation of Personal Identification
Numeric, and is used to restrict the use of an
unauthenticated user.
PIN Password Change Procedure
1. Select 'PIN' from the 'Change code' list and then
press [Select].
2. Input the current PIN,and press [Select].
3. Input the new PIN,and press [Select].
4. Input the new PIN once again,and press [Select ].
- If the PIN is different from that of step 3, the procedure
is restarted from step 3.
5. When the PIN is properly changed, a "Successfully
Changed" message as well as new PIN code
appears. With an incorrect PIN input in step 2, the
procedure is restarted from step 2, and the
remaining allowed numeric of input attempts is
decreased by 1.
Settings
91