Security; Pin Code Request - LG U8210 Manual De Usuario

Settings
Connection title
Bearer
Authentication
Username
Password
APN
Traffic Class
Req. Max UL Bitrate
Req. Max DL Bitrate
- Press "Save" key to save any configuration changes.
90
Access Point profile name
Choose the bearer from the list.
(Default is "Packet Switching")
Choose the authentication from the
list. (Default is "No auth")
Information provided by Service
Provider.
Information provided by Service
Provider.
APN name to access network.
Information provided by service
provider.
Choose the Traffic Class from the
list. (Default is "Subscribed")
Choose the Request Maximum
Upload Bitrate from the list. (Default
is "Subscribed")
Choose the Request Maximum
Download Bitrate from the
list.(Default is "Subscribed")

12.4 Security

You can activate a PIN code. When it is activated, a
window asking you to enter the PIN code appears
when you turn on the phone so as to prevent
unauthorized use of the phone.

12.4.1 PIN code request

You can activate a PIN (Personal Identification
Numeric). You can check the current status of
configuration from the status bar.
Item Description
Enable PIN Request You have to input the PIN code each
time the mobile phone is turned on.
Disable PIN Request You do not have to input the PIN code
when the mobile phone is turned on.
PIN request and release procedures
1. Select 'PIN request' item from the list, and press
[OK]. Then a window allowing you to select 'On' or
'Off' appears.
- Select 'On'/'Off' from the list, press [OK], and input the
current PIN code to set the PIN request. If 'PIN
request' is already On/Off, an "Already