Bluetooth Telephone
Alphabet (upper case), numbers and symbols
—Alphabet (lower case)
5
Touch a letter to enter.
# To delete a character and leave a space, touch
.
6
Touch MEMORY to store the new
name.
Editing phone numbers
You can edit the phone numbers of Phone
Book entries.
1
Touch PHONE BOOK to display the
Phone Book.
2
Select a Phone Book entry you want to
edit.
See step two to three on Calling a number in
the Phone Book on page 15 for how to do this.
3
Touch EDIT next to the phone number
you want to edit.
The display is changed to the Phone Book dial
edit display.
4
Touch 0—9 to input numbers.
# For an international call, touch add "+" to add
+ to the phone number.
# Touch CLEAR to delete the number.
5
Touch c or d to move the cursor and
edit the number.
Repeat these steps until you have finished
changing.
6
Touch ENTER to store the new number.
Clearing a Phone Book entry
You can delete Phone Book entries in the
Phone Book one by one.
To clear all of your entries in the Phone Book,
refer to Clearing memory on this page.
1
Touch PHONE BOOK to display the
Phone Book.
2
Select a Phone Book entry you want to
delete.
See step two to three on Calling a number in
the Phone Book on page 15 for how to do this.
3
Touch DELETE to delete the Phone Book
entry.
A confirmation display appears. Touch YES to
delete the entry.
# It takes about 10 seconds to delete the data.
To make it sure, leave the ignition switch ACC or
ON position for 10 seconds after you operate the
deletion.
# If you do not want to clear a Phone Book entry
that you have selected, touch NO.
Clearing memory
You can clear memory of each item; Phone
Book, dialled/received/missed call history list
and preset phone number.
1
Touch CLEAR MEMORY on the function
menu.
2
Touch CLEAR next to the item you want
to delete from the memory.
Select from the following:
PHONE BOOK (phone book)—DIALED CALLS
(dialled call history)—RECEIVED CALLS (re-
ceived call history)—MISSED CALLS (missed
call history)—PRESET DIALS (preset phone
numbers)
After selecting a desired item, a confirmation
display appears. Touch OK to delete the mem-
ory.
Section
02
17
En