Publicidad
13
13
31G
L
4G
BLACK 9/16" LARGE HEAD SCREW
(18 used for the BRACKETS)
Fasten two CORNER BRACKETS (31G) to the BASES (K and L) and BOTTOM (D). Use eight BLACK 9/16" LARGE HEAD
SCREWS (1S).
Fasten three METAL BRACKETS (4G) to the BOTTOM (D). Use three BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Be sure the BRACKETS are even with the edge of the BOTTOM.
Fasten the BASE (M) to the BOTTOM (D) and BASES (K and L). Use seven BLACK 9/16" LARGE HEAD SCREWS (1S) through
the METAL BRACKETS (4G) and CORNER BRACKETS (31G) and into the BASE.
414721
D
D
1S
www.sauder.com/services
M
K
31G
Page 17
Publicidad
