Publicidad
18
18
BLACK 1-7/8" FLAT HEAD SCREW
(1 used into a stud in your wall)
BLACK 9/16" LARGE HEAD SCREW
(1 used into the top of your unit)
Apply the WARNING LABEL (4L) to the TOP (C). You should be able to read the label when the TV is removed from the unit. When
the TV is in place, it should hide the label. Peel off the backing and apply the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the product. Once applied, do not try to remove it.
To help prevent the TV from sliding, place the ANTI-SKID PAD (3M) under the front support of the TV or divide among the front
supports if more than one.
We recommend using the SAFETY BRACKET (1G) for added stability. Use a BLACK 9/16" LARGE HEAD SCREW (1S) into the
top of the unit and a BLACK 1-7/8" FLAT HEAD SCREW (2S) into a stud in your wall.
Push a CAM COVER (13P) onto each visible HIDDEN CAM.
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
Page 22
2S
1G
1S
4L
135 lbs.
25 lbs.
60 lbs.
www.sauder.com/services
WARNING
Never use this furniture with a TV that is
too large or too heavy. Severe injury or
death can occur. The TV and furniture
will be unstable and may tip.
- The TV must weigh less than 135 lbs.
- The base of the TV must be able to sit
completely on this shelf.
C
25 lbs.
To cover HIDDEN CAMS
3M
13P
(14 used)
414721
Publicidad
