Sauder Barrister Lane 414721 Manual Del Usuario página 9

5 5
O
Fasten the MOLDINGS (O and P) to the TOP (C). Tighten two TWIST-LOCK
414721
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must remain
fully inserted in the hole of the adjoining part while
locking the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver
as tight as possible.
Dowel end
www.sauder.com/services
®
FASTENER
C
Long fi nished edge
®
FASTENERS.
P
Page 9