Checking And Choosing The Proper Location - LG WM2240 Serie Manual Del Usuario

12
INSTALLATION
Checking and choosing the proper
location
Install the washing machine on a solid floor that is strong and
rigid enough to support the weight of the washing machine,
even when fully loaded, without flexing or bouncing. If the
floor has too much flex, you may need to reinforce it to make
it more rigid. If the floor is not solid, it may cause severe
vibration and noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth ground.
2
Two or more people are needed for moving and
unpacking the washing machine.
3
Allow for sufficient space between the walls and the
washing machine for installation.
- See page 12, Space requirements for Installation for
details on installation distances.
Space requirements
You must allow sufficient space for water lines, the drain
line, and airflow.
NOTE
Required spaces may increase depending on walls,
y
doors, or floor moldings on walls, door, or floor
moldings.
The power outlet must be located within 1.5 m
y
(60 inches) of either side of the washing machine.
Installing on a floor
21 / "
1
4
(54 cm)
4"
29 / "
3
4
(10 cm)
(75.6 cm)
51"
(129.5 cm)
27"
1" 1"
68.6 cm
(2.5 cm) (2.5 cm)
Installing on a pedestal or stacking kit
30" 4"
(76.1 cm) (10 cm)
NOTE
Refer to the instructions in the PEDESTAL (Optional)
y
or STACKING KIT before installing with a PEDESTAL
(Optional) or STACKING KIT.
77
1
(190.5 cm)
27"
1" 1"
(2.5 cm) (68.6 cm) (2.5 cm)
/ "
2