Cleaning The Door Seal - LG WM2240 Serie Manual Del Usuario

34
MAINTENANCE
6
Recap the plug onto the drain hose and reattach the drain
hose.
7
Insert the drain pump filter.
8
Close the drain pump filter cover.
CAUTION
Make sure to pull out the plug before cleaning.
y
Failure to do so may cause electric shock.
Opening the drain filter will result in water
y
overflowing if there is water in the washer tub.
Make sure to check if the water is completely
drained before opening the drain filter.
If you use the washing machine with the drain filter
y
reassembled incorrectly after cleaning it, or if you
use the machine without the filter, it may cause
leaks or malfunction of the washing machine.
NOTE
Q message will blink when the drain pump filter is
clogged with dirt. Clean the drain pump filter.

Cleaning the door seal

Clean the door seal once a month to prevent build-up of dirt
in the door seal.
1
Wear rubber gloves and protective goggles.
2
Dilute 3/4 cup (177 ml) of liquid chlorine bleach in 1 gallon
(3.8 L) of water.
3
Soak a sponge or a soft cloth in this diluted solution and
wipe down all around the door seal.
4
Wipe any moisture with a dry towel or cloth after
cleaning.
5
Leave the door open to allow the door seal to dry
completely.
CAUTION
Cleaning the door seal with an undiluted solution
may cause malfunction of the door seal and washing
machine parts.