Klarstein 10028655 Manual Del Usuario página 11

Ocultar thumbs Ver también para 10028655:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

For the installer: Connecting to the electrical power supply
• The electrical connections must be carried out only in accordance with the local norms and laws.
• Make sure that the power supply corresponds to the rated voltage on the rating plate of your device. If this
is not the case, do not connect the device.
Make sure that electrical lines do not touch moving parts in the device and that they are not being
squeezed.
• The device must be earthed.
1. The distance between the cooking field and the lower edge of the cooker hood must be at least 65 cm.
2. When the height is defined, attach the hook to the defined place. First, set the drill holes. (You will need a
driller and fitting drills, dowels and screws). Next screw the hook to the wall.
3. After the hook has been mounted, fix the inner hook for the chimney. Mind the correct distance (use a
gauge), since the chimney will be fixed to the hook later on.
4. Attach the outer hook for the chimney to the outer chimney cover and make sure that the inner chimney
can be moved freely.
5. Mount the hood onto the anchoring.
6. Adjust the inner chimney to the right height, so that the hooks are even and fix them. After this, you can
fix the hood with the safety screws.
11
Installation

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1003009910030213

Tabla de contenido