Connecting To The Battery - Trueshopping CT7AMBCM Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Charger Type
Start Voltage
Housing Protection
Battery Type
Battery Capacity
Accessories Included
Ambient Temperature

CONNECTING TO THE BATTERY

1) Identify polarity of battery posts. The positive battery terminal is typically marked by
these letters or symbol (POS,P,+). The negative battery terminal is typically marked by
these letters or symbol (NEG,N,-).
2) Do not make any connections to the carburetor, fuel lines, or thin metal parts.
3) Identify if you have a negative or positive grounded vehicle. This can be done by
identifying which battery post (NEG or POS) is connected to the chassis.
4) For a negative grounded vehicle (most common): connect the RED POSITIVE clamp /
ring connector first to the positive battery terminal, then connect the BLACK NEGATIV
clamp / ring connector to the negative battery terminal or vehicle chassis.
5) For a positive grounded vehicle (very uncommon): connect the BLACK NEGATIV
clamp / ring connector first to the negative battery terminal, then connect the RED
POSITIVE clamp / ring connector to the positive battery terminal or vehicle chassis.
6) When disconnecting, disconnect in the reverse sequence, removing the negative first (or
positive first for positive ground systems).
7) Follow these steps when using 12V accessory plug: keep the vehicle hood open.
Connect the end of the 12V accessory plug to the charger; insert the 12V accessory plug
into the vehicle's 12V outlet. If the vehicle's ignition key has to be on in order for the 12V
outlet to supply / receive power, turn the key, without starting the engine.
8) A marine (boat) battery must be removed and charged on shore. To charge it on board
requires equipment specially designed for marine use.
24VDC, 3.5A;
Temperature Controlled
8 steps, Full-automatic Charging Cycle
> 1V
IP54
All Types of 12V & 24V Lead-acid
Batteries, and 12V Lithium Ion Batteries
14-230Ah (12V), 14-115Ah (24V),
Maintains All Battery Sizes
Clamp Connectors, Ring Connectors, 12V
Cigarette Lighter Plug, 12V SUPPLY
Cigarette Lighter Outlet, Screws
0℃ ~ +40℃

Publicidad

Tabla de contenido
loading

Tabla de contenido