Operation - Selecta MEDILOW-S Manual De Instrucciones

INSTRUCTION MANUAL
¡ATENCIÓN! IMPORTANTE PARA SU SEGURIDAD
CAUTION!!! IMPORTANT FOR YOUR SAFETY
1
4
/ Silicone oil
5
/ Water
J
.P. SELECTA s.a.u.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
CODE 80104 REV I
(Sujetas a modificaciones sin previo aviso)
VERY IMPORTANT BEFORE THE FIRST START UP:
Put the buffers at the rear part of the equipment to
avoid contact with the wall (see drawing).
SEPARADOR

OPERATION

CONTROL PANEL:
2
3
6
1. Running compressor led
2. Current temperature display
3. Set temperature display
4. Key to scroll parameters
5. Keys to modify parameters
6. Key to exit from the menus
CONTROL PANEL:
- Select the operating temperature with the keys
(5). The temperature selection is shown in the
display (3).
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - http://www.jpselecta.es
March 2019 (It can be modified without notice)
Be sure that the voltage supply is the same as the one
indicated on the characteristic plate of the equipment.
Do not use the equipment if it is NOT earthed.
If you have to change the plug bear in mind the following:
Blue cable: Neutral.
Brown cable: Phase.
Yellow/green cable: Earth.
VERY IMPORTANT BEFORE THE FIRST START UP:
Place the buffers at the rear part of the equipment to avoid
contact with the wall (see drawing).
OPERATION
CONTROL PANEL:
1
6 5
1. Screen 1
2. Screen 2
3. Up/Down keys
4. Digit change key
5. Parameter change key
6. Parameter input key
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
Pag.: 5
3
4
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
Pag.: 10
2