Sauder Adept Storage 418137 Instrucciones De Ensamblaje página 8

Step 4
First, fi ll the holes in the DOOR MOLDINGS (M) 1/4 to 1/2 full
å
with GLUE (54M). Then, insert four WOOD DOWELS (26F) into
the holes. Wipe away the excess GLUE.
Now, fi ll the outer holes in the edges of the DOOR (G) 1/4 to 1/2
å
full with GLUE.
Fasten the DOOR MOLDINGS (M) to the DOOR (G). Tighten four
å
HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the DOOR MOLDINGS
å
insert into the holes in the DOOR. Wipe away the excess GLUE.
NOTE: Be sure all angled edges on the DOOR MOLDINGS (M)
å
are facing the fl oor as shown in the enlarged diagram.
M
26F
54M
Page 8
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Angled edge
1
2
G
418137
Fill the holes 1/4 to 1/2 full with GLUE.
M
www.sauder.com/services
26F