Ingersoll Rand EC24E Manual Del Usuario página 5

Controladores para atornilladores electricos
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
OPERATION
Do not drop or abuse the Controller.
Whenever a Controller is not being used, position
the Power Switch to the "OFF" position and unplug
the power cord.
MODELS EC24E, EC24U, EC24E–ESD
AND EC24U–ESD CONTROLLERS
POWER SWITCH
SLOW START ADJUSTMENT
A sudden increase in the speed of the screwdriver bit
occurs within the first five seconds of start–up when
using the SLOW START ADJUSTMENT feature
described below. This occurs each time the screwdriver
is operated.
Use of the SLOW START ADJUSTMENT lets the
screwdriver bit rotate slowly for a brief period of time
(zero to five seconds) to provide easier alignment and
engagement of the screw threads.
EC24E, EC24E–ESD, EC24U and EC24U–ESD Screwdriver Controllers
MODEL NO.
EC24E, EC24E–ESD
EC24U, EC24U–ESD
SPEED ADJUSTMENT
SLOW START
ADJUSTMENT
RECEPTACLE FOR
SCREWDRIVER CABLE
(Dwg. TPD1833–1)
HERTZ
WATTS
INPUT VOLTS
(ALTERNATING
CURRENT)
50/60 Hz
25
50/60 Hz
25
1.
To use the SLOW START feature, turn the SLOW
START ADJUSTMENT clockwise. This lets the
screwdriver bit start rotating at a slow speed and
suddenly come up to full speed. Increased clockwise
adjustment allows the the screwdriver bit to turn at a
slow speed for a longer period of time before suddenly
coming up to full speed.
2.
To cancel the SLOW START feature, turn the SLOW
START ADJUSTMENT counterclockwise until it
stops. This cancels the SLOW START feature and the
screwdriver bit will start rotating at full speed.
SPEED ADJUSTMENT
Use of the SPEED ADJUSTMENT changes the free speed
of the screwdriver. The free speed can be adjusted from
full rated speed (turn SPEED ADJUSTMENT to full
clockwise position) to 70% of full rated speed (turn SPEED
ADJUSTMENT to full counterclockwise position).
POWER SWITCH
The POWER SWITCH turns the power on or off. When
power is on, a light illuminates the push–button of the
switch.
SCREWDRIVER CORD RECEPTACLE
The SCREWDRIVER CORD RECEPTACLE connects the
screwdriver power cord to the controller.
MAINTENANCE
DO NOT ATTEMPT TO REPAIR THIS TOOL.
All repairs and maintenance of the Controller and its cord
must be performed by an authorized servicenter.
Contact sales office listed on last page of this form.
OUTPUT
VOLTS
(DIRECT
CURRENT)
230 V ~
24 V
230 V ~
24 V
5
SIZE IN INCHES
(WIDTH, HEIGHT,
WT.,
DEPTH)
PDS.
3.25 x 4.1 x 10.5
5.1
3.25 x 4.1 x 10.5
5.1
TYPE
OF
CORD
VDE
UK

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ec24uEc24e–esdEc24u–esd

Tabla de contenido