Initial Settings; Initial Setup - Kenwood DNX996XR Guía De Inicio Rápida

Basic Operations

Initial Settings

Initial setup

Perform this setup when you use this unit first
time.
1
Set each item as follows.
■ [Locale]
Select the country for the navigation system.
The language, the distance unit, and the
gasoline unit are set.
1 Touch [Locale].
2 Select the desired country.
■ [Language]
Select the language used for the control
screen and setting items. Default is "American
English(en)".
1 Touch [Language].
2 Touch [Language Select].
3 Select the desired language.
4 Touch [
].
For details, see User Interface Setup
(P.90) in the Instruction Manual.
■ [Display]
Set the key illumination color.
If it is hard to see the image on the screen
even, adjust the viewing angle.
1 Touch [Display].
2 Touch [Key Color].
3 Select the desired color.
4 Touch [
].
(DNX996XR / DNR876S only)
5 Touch [Display Adjustment].
6 Adjust a viewing angle and a tilt position.
7 Touch [
].
8
(DNX696S / DNX576S / DNR46EX / DNR476S
only)
5 Touch [Viewing Angle].
6 Select a viewing angle.
7 Touch [
].
Viewing Angle
You can adjust the viewing angle when the
image on the screen is difficult to see evenly.
The smaller the (negative) value, the more
whitish the image on the screen looks. "0"
(Default)/"-1"/"-2"/"-3"
For details, see Display Setup (P.92) in
the Instruction Manual.
■
[Camera]
Set the parameters for the camera.
1 Touch [Camera].
2 Set each item and touch [
For details, see Camera Setup (P.84) in
the Instruction Manual.
[OEM SETUP]
■
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■ [DEMO]
Set the demonstration mode. Default is "ON".
2
Touch [Finish].
NOTE
• These settings can be made from the SETUP
menu. See Setup (P.89) in the Instruction
Manual.
].