How To Use; Getting St Rted - BLACK&DECKER Home CMD3400MB Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONTROL P NEL
6:00
POWER
AM
PROG
HOUR
WARMING PLATE
1. Backlit LCD display
Shows:
• Current time of day
• Preset auto brew cycle
• Freshness indicator
• Temperature bar for warming plate
2.
uto Button: ctivates the auto brewing function.
3. Brew Strength Button: llows you to select Mild, Regular or Strong coffee
4. Min Button: Sets desired minutes.
5. Temperature Control for Warming Plate: Press the left or right button to decrease
or increase the temperature of the warming plate.
6. Hour Button: Sets desired hour.
7. Prog Button: llows you to select a specific time for brewing coffee.
8. Power Button: Unit comes on and starts brewing cycle or unit shuts off and cancels
brewing cycle.
AUTO
MILD
REGULAR
FRESH
STRONG
BREW
STRENGTH
TEMP
MIN
5

How to Use

This product is for household use only.

GETTING ST RTED

• Remove all packing material, and any stickers from the product.
• Remove and save literature.
• Wash all removable parts as instructed in Care and Cleaning section of this
manual.
• Uncoil power cord and plug into standard electrical
outlet.
• Open water reservoir cover and pour fresh cold water
up to 12-cup level mark into the water reservoir ( ).
• Close water reservoir cover.
• Press brew basket compartment release button to open.
• Take out removable brew basket.
• Place empty 8 to 12 cup paper filter into removable
brew basket.
• Place basket into brew basket compartment (B).
• Close brew basket compartment until is snaps into place.
• Place empty carafe on warming plate.
B
• Brew water through unit without adding coffee grounds.
Note: This removes any dust or residue that may remain in the system during the
manufacturing process.
• Discard the water from the carafe and paper filter from brew basket.
• Press the Power button to shut off the unit.
• Unplug the unit and allow it to cool down.
W TER FILTER:
1. Remove carbon filter from packing material.
2. Press latch on filter holder to open (C).
C
3. Place carbon filter inside.
4. Close the filter holder tightly until it snaps into place (D).
D
5. Place filter holder inside the water reservoir and insert it
into the recess at the bottom right hand corner (E).
Note: Replace carbon filter every 60 brewing cycles or
every 2 months after removing it from the sealed package.
(Call the 800 number on the front cover for replacements)
E
6

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido