Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Read the instructions and keep them for future reference. Follow
and comply with the safety precautions! Make sure you know how
to mount and use the Orion child bike seat before using it.
Product Description:
Orion is a front-mounted child bike seat that is mounted on the
head tube with a round section diameter between 32 to 52 mm
(1.25" - 2"). Orion is designed for carrying children who are up to a
maximum of 15kg (33lbs).
Components:
1
Seat
2
Padding (fixed with Velcro system)
3
Safety belts
4
Footrests with their respective straps
5
Fastening shackle
6
Support arm
7
Fastening block
8
2 U-shaped brackets
9
2 plastic covers
10
2 M6x20 screws and their respective nuts with toothed washers
11
Set of five reductions for different sized bicycle frames
12
Seat fixing plate
13
2 closing caps and relative M5x50 screws with M5 nuts
(when the fastening shackle is to be removed)
14
Hexagon ring wrench
15
2 rotating pins
16
4 M6 hexagonal flanged nuts
17
2 screw casings
!
CAUTION
1)
The Orion child bike seat must be mounted on the head tube,
as shown in this manual (Illustration 10). Tighten fasteners
securely, and check them frequently.
2)
Check that the bicycle is in good working order and is suitable
for adding supplementary loads. The bicycle should be of
proper size and adjustment of the rider. Check the information
supplied with the bicycle or ask for information and advice from
the bicycle manufacturer.
3)
Do not carry a child who is less than 12 months of age in the
n_InstructionManual-Text.indd 1
ORION
Front-Mounted Child Bike Seat
Orion Instruction Manual - Peg Perego
1
12/02/14 15
Publicidad
Tabla de contenido
