How To Use Humidifier Controls - Vornado ULTRA3 Guía Para El Usuario

Read and understand this owners guide before operating this
product. Position unit to not blow directly on objects or plants. Plug
unit into a 110-120 volt AC outlet.
Power Button (A) - turns the unit On or Off. LED light will illuminate
when powered On. Unit will default to High Output and Continuous
Humidity setting. Adjust settings for desired operation.
Output Button (B) - adjusts fan speed and mist output. Select High,
Low, or Auto.
High - high mist output and high fan speed for fast humidification for
larger rooms. High speed operation will evaporate 2 gallons of water
(+/- 10%) in 24 hours of continuous operation. (This assumes room
conditions of 70º F and 30% relative humidity.)
Low - low mist output and low fan speed operation for quiet,
nighttime use or smaller rooms. On Low operation, your Humidifier
may run without refilling for extended periods.

How to Use Humidifier Controls

Auto - operation for more precise humidity control. Fan speed and
mist output will fluctuate to better maintain set humidity level with the
minimal amount of fan noise.
Humidity Button (C) - sets desired humidity level. Select 40% - 60%
or Continuous. Press Humidity Button until desired humidification
level is illuminated. The unit will operate until the desired humidity
level is reached, at this point, the mist will turn Off. The humidity level
indicator light will remain on. If the mist does not turn on, the set
humidity level may be lower than the room humidity level. Increase
the humidity set point until the mist turns on. This is an indication of
the level of humidity already in the room. If moisture forms on walls
or windows, lower humidity settings or turn Off Humidifier.
English 9