How To Use - Vornado EVHUM Manual Del Propietário

All manuals and user guides at all-guides.com
STEP 1
Position the unit to not blow directly on objects or plants. Plug the unit into a 110-120 volt
AC outlet.
STEP 2
To turn unit on, press the POWER button (A). The lights of the humidity (B) and fan speed (C)
will turn on in the default setting - high fan speed, continuous humidity.
STEP 3
Select a fan speed and humidity level for the desired humidification. Use these general
guidelines for operation:
HIGH fan speed/higher humidity settings for fast humidification for larger rooms. High
speed operation will evaporate 3 gallons of water (+/- 10%) in 24 hours of
continuous operation. (This assumes room conditions of 70º F and 30%
relative humidity.)
MEDIUM output for normal operation.
LOW operation is for quiet, nighttime operation or smaller rooms. On LOW operation,
your Humidifier may run without refilling for extended periods.
STEP 4
Set the desired fan speed and desired humidity % level by pressing the appropriate buttons
(D and E respectively) and indexing the setting through the options until the desired settings
are reached. The indicator light will turn on at each level and setting. Once the desired hu-
midity level and fan speed are set, the Humidifier will operate until the desired humidity level
is reached. At this point, the fan will turn off and the fan speed indicator light will turn off.
The humidity level indicator light will remain on. If the fan does not turn on, the humidity
level setting may be lower than the actual room relative humidity level. Press the humidity %
button, indexing the desired humidity level % higher, until the fan turns on. This is an indica-
tion of the level of humidity already in the room.
E
C
QUICK DAILY MAINTENANCE
1. Empty Reservoir before refilling with clean water. Rinse, wipe clean and dry with clean
cloth or paper towel.
2. Refill Reservoir to fill mark with cool, clean tap water. Do not overfill.
3. Lower humidity control settings or turn off Humidifier if moisture forms on walls or
windows.

How to Use

B
D
A
A. Power Button
B. Humidity Level LCD
Indicator Lights -
35% - Continuous
C. Fan Speed - Low,
Medium and High
Indicator Lights
D. Fan Speed Control
Button
E. Humidity Level Control
Button
5